
As water temperatures drop and walleye push out onto deep structure and open-water flats, fall trolling season kicks into high gear. Running a full spread of crankbaits and spinner rigs at multiple depths and distances is the key to covering water and finding active fish, but it also means keeping several rods organized, secure, and ready without a tangle in sight. Millennium Marine's Spyderlok R400 Rod Tree, R401 Rod Pod, and R402 Fixed Position Rod Tree give walleye trollers the rod-holding lineup to run a wider, more efficient spread all fall long.
Whether pulling planer boards across a deep breakline, running lead-core off the back of the boat, or working a tight jigging spread over suspended fish, all three holders are built on Millennium's patented Spyderlok technology, which locks rods at a tight, secure angle so a hard-charging fall walleye can't shake a rod loose. Rods swivel a full 360 degrees, and the R400 and R401 add 180-degree vertical adjustment so that anglers can dial in the exact spread they need as they work a piece of structure or troll a contour line. A useful ridge in the bottom of each rod holder keeps rods from turning as boards and lines get pulled tight, and large tubes make it easy to pull a rod free the moment a fall walleye is on, even with a fish already fighting on the line.
Machined from anodized aluminum with a low-glare finish and finished with stainless steel hardware and a durable rubber boot to protect rod handles, all three holders are built to fish hard through the cold, wet conditions of a fall troll and hold up for seasons to come. Each mounts directly to the boat's deck or gunwale, or to the Spyderlok R-101 base or Track System, and sits flush with the carpet or deck for a clean, low-profile install with easy two-knob removal and no tools required. All three come backed by a 1-year warranty.

Spyderlok R400 Rod Tree Gen 2 Features:
- Anodized aluminum construction, low-glare finish
- Great for salt or fresh water
- Smooth and easy pole angle adjustment
- Easy two-knob removal
- Mounting plate is flush with carpet – no more stubbed toes
- No tools necessary for use
- Patented Spyderlok technology ensures tight, secure locking angles
- Mounts with either the R-101 or Spyderlok Track System
- Useful ridge in the rod holder bottom to prevent the rod from turning
- Stainless steel hardware
- Durable rubber boot to protect rod handle
- Large tubes make it easy to remove the rod, even with a fish
- Swivels 360° and 180° vertical
- Makes pulling planer boards a breeze
- 1-year warranty
R400 Rod Tree Specifications:
- Material: Anodized aluminum
- Weight: 6.8 lbs.
- Size: 30" H | 8.5" W | 8.5" L
- (1) Tube: 10.25" L | (1) Tube Opening: 1.75" W

Spyderlok R401 Rod Pod Gen 2 Features:
- Anodized aluminum construction, low-glare finish
- Great for salt or freshwater
- Smooth and easy pole angle adjustment
- Easy two-knob removal
- Mounting plate is flush with carpet – no more stubbed toes
- No tools necessary for use
- Patented Spyderlok technology ensures tight, secure locking angles
- Mounts with either the R-101 or Spyderlok Track System
- Useful ridge in rod holder bottom to prevent rod turning
- Stainless steel hardware
- Durable rubber boot to protect rod handle
- Large tubes make it easy to remove the rod, even with a fish
- Swivels 360° and 180° vertical
- Makes pulling planer boards a breeze
- 1-year warranty
R401 Rod Pod Specifications:
- Material: Anodized aluminum
- Weight: 2.2 lbs.
- Size: 14" H | 6.5" W | 4" L

Spyderlok R402 Fixed Position Rod Tree Features:
- Anodized aluminum construction, low-glare finish
- Great for salt or fresh water
- Easy two-knob removal
- Mounting plate is flush with carpet – no more stubbed toes
- No tools necessary for use
- Mounts with either the R-101 or Spyderlok Track System
- Useful ridge in rod holder bottom to prevent rod turning
- Stainless steel hardware
- Durable rubber boot to protect rod handle
- Large tubes make it easy to remove the rod, even with a fish
- Swivels 360°
- Makes pulling planer boards a breeze
- 1-year warranty
R402 Fixed Position Rod Tree Specifications:
- Material: Anodized aluminum
- Weight: 4 lbs.
- Size: 39" H | 13" W | 4.5" L
For more information, please visit WWW.MILLENNIUMMARINE.COM.

