The blade design of Fire N The Hole Broadheads is what sets them apart from other broadheads. The blades are the workhorse of every design of broadhead. Fire N The Hole Broadheads have blades which perform better and do more than other blade designs.

1x4 inch mechanical has a 2 ¼ inch blade which is as thick and durable as some knife blades. The blade are sharpened with a single bevel the full length of the blade. This gives the 1x4 cutting surface along the entire with of the 4 inch cutting surface. The rounded section of the blade rotates to form a cutting point in front of the ferrule when the beveled blades are placed back to back. The point of the blades stab and cut with an angle which guides the blades to the side in a controlled expansion.

The ring broadheads are a three bladed fixed broadhead with a 1 inch cutting ring pressed into notches on the outside of the blades. The ring is a circular blade, honed true on the inside, and sharpened from the inside out. The design of the ring becomes a stabilizer. When shot the air passes through the center and is displaced evenly around the outside in flight. The ring cuts a 1 inch hole through the animal. A 1 inch hole leads to incredible blood trial and an unmatched killed power.

No matter if you prefer fixed blades or mechanicals Fire N The Hole Broadheads gives you designs you can count on. Both designs have been proven in the field to kill faster than other designs out there. A hole beats a slice. A 4 inch cut is the largest on the market.

Fire N The Hole Broadheads is currently looking for manufacturers representatives throughout the United States. For territory consideration contact Robert Anthon at banthonbamm@gmail.com or 716-717-5768.

For information on Fire N The Hole products visit www.firenthehole.com or 618-535-1368